چکیده

The period of quantization noise depends on the structure of the modulator the initial conditions the input and the modulus of the quantizer. The structures examined are the Multistage Noise Forming Structures (MASH) the Single Quantizer (SQ) and the Feedback Error Modulator (EF). There are two ways to maximize the periodicity which are random methods and deterministic methods. The random method uses vibration to increase the signal cycle. The definitive method causes changes in the internal structure of the modulator. Most randomized methods reduce undesirable solids and increase the period of quantization noise. The disadvantage of random methods is that they generate noise in the output spectrum. In this proposal a new method for MIG digital Sigma Delta modulators is proposed to try to increase the output period and reduce the undesirable ones. The proposed method also uses modulators with different word lengths. The input word is divided into several parts and each part is transferred to a modulator with a shorter word length. Therefore hardware consumption is reduced and the power consumption of transistors is reduced. Also in this structure vibration signal is used to change the alternating state of the output and reduce the undesirable tones.

کليدواژه ها

phase noise reduction self-injection locking cross-coupled oscillator Adler equation substrate noise coupling

کد مقاله / لینک ثابت به این مقاله

برای لینک دهی به این مقاله، می توانید از لینک زیر استفاده نمایید. این لینک همیشه ثابت است :

نحوه استناد به مقاله

در صورتی که می خواهید در اثر پژوهشی خود به این مقاله ارجاع دهید، به سادگی می توانید از عبارت زیر در بخش منابع و مراجع استفاده نمایید:
سید علی سادات نوری , 1400 , Design of a digital delta sigma modulator to reduce hardware and power consumption in fractional frequency synthesizers , دومین کنفرانس پژوهش های کاربردی در مهندسی برق