چکیده

Different components of the Gas Insulated Switchgear (GIS) structure can have impacts on Partial Discharge (PD) Electromagnetic (EM) wave propagation. This is important in selecting PD sensor placement to provide an optimum sensitivity in its measurement and to provide accurate localization of PD sources within the GIS. In this paper impact of the PD sensor direction angle (with respect to a PD source) on PD EM wave’s propagation characteristics is investigated. To quantify and analyze the calculation results the first peak of related electric field and the signal s power over the two frequency ranges (0.3-2 GHz and 0.3-3 GHz) are recorded. The impacts of different enclosure diameters different types of spacers and various circuit breaker contact gap distances (under different voltage levels) on this wave propagation are studied. Additionally the two standard GIS busbar profiles named L-shape and T-shape are discussed in this paper. The results of this study shows that the attenuation degree of the measured PD EM waves is strongly influenced by the busbar dimensions and its components configurations. The GIS busbar designer can employ these results to select the proper PD sensors and their installation locations.

کليدواژه ها

Gas Insulated Switchgear Partial Discharge Ultra High Frequency measurements Electric Field and Electromagnetic Wave.

کد مقاله / لینک ثابت به این مقاله

برای لینک دهی به این مقاله، می توانید از لینک زیر استفاده نمایید. این لینک همیشه ثابت است :

نحوه استناد به مقاله

در صورتی که می خواهید در اثر پژوهشی خود به این مقاله ارجاع دهید، به سادگی می توانید از عبارت زیر در بخش منابع و مراجع استفاده نمایید:
رضا رستمی نیا , 1400 , تاثیر پارامترهای سوییچگیر گازی بر انتشار امواج الکترومغناطیس حاصل از تخلیه جزيی , دومین کنفرانس پژوهش های کاربردی در مهندسی برق