چکیده

One of the most important problem that has become prominent in river engineering and water resources is to predict sediment load in alluvial channels. Sediments are the production of erosion that are being transported using water wind ice and gravity. Accurate estimating the volume of sediments that a particular stream can transport is one of the main subjects in river morphology. Sediment transport estimation is widely studied and many experimental and semi-experimental equations have been developed but depending on the hydraulic conditions and sediment characteristics in each river some of these equations may yield better results than the others. In this study sediment transport estimator (STE) software was used for estimating bedload transport in the Qaresoo river located in Iran Golestan province in which bedload is measured. In this software the abilities of 55 bedload estimator equations were evaluated by using various equations for calculating shear stress and threshold sediment motion and the best combination of them for estimating bed load with the highest accuracy was found using the Genetic Algorithm. The results showed that the best results were achieved by combination shear velocity and threshold shear velocity from Van Rijn (1984) and Hjulstrom (1935) respectively. Using this combination the best bedload transport formula in the river studied is Chang et al. (1965) with a 62.5% of discrepancy ratio between 0.5 to 2 and 0.91 as the average.

کليدواژه ها

Shear Stress Threshold sediment motion Sediment Transport Software STE Empirical sediment transport formulae Assessment of bedload estimators.

کد مقاله / لینک ثابت به این مقاله

برای لینک دهی به این مقاله، می توانید از لینک زیر استفاده نمایید. این لینک همیشه ثابت است :

نحوه استناد به مقاله

در صورتی که می خواهید در اثر پژوهشی خود به این مقاله ارجاع دهید، به سادگی می توانید از عبارت زیر در بخش منابع و مراجع استفاده نمایید:
رضا تیموری , 1400 , Estimations of bedload transport using different shear stress and threshold sediment motion equations by using STE software , دوازدهمین کنفرانس بین المللی مهندسی رودخانه